With superior technology and style, world-leading design and “all-black” colour, the new HEATSTRIP® Classic with Remote Electric radiant outdoor heater will Make a statement in your alfresco-area, with the easy control of heat settings.
The Range consists of 2 Models available THH2400AR (2400W) & THH3200AR (3200W), with a new remote control heater which has 1-3 temperature settings and a 1-24 hour timer controller. The Convenient DIY installation for the 2400W model with a 2-year residential and a 1-year commercial warranty. Note: The 3200W model must be hardwired
The Slimline design and “all black” colour in a new compact and higher output design along Corrosion-resistant materials make this range suitable for most environments.
General recommendations for Positioning HEATSTRIP® Classic with Remote:
- Ideal mounting height: 2.3m to 2.5m. Maximum is 2.7m in a fully protected/enclosed outdoor environment.
- Ideal mounting location: ceiling mounted, directly above area to be heated (eg. above a table)
- For a protected outdoor area, a minimum of 500W/m2 is required. For indoor spot heating, a minimum heating capacity of 400W/m2 is recommended.
The table below outlines the maximum coverage of each HEATSTRIP® Classic with Remote model based on 3 different scenarios with direct overhead mounting. For example, for an outdoor area that is protected from prevailing winds by walls, cafe blinds etc, Model THH2400AR will cover 4.8m2 and Model THH3200AR will cover 6.4m2. For angled wall mounting applications, the coverage is reduced by up to 40%.
| MODEL | INDOOR PROTECTED (m2) | OUTDOOR ENCLOSED (m2) | OUTDOOR EXPOSED (m2) |
|---|---|---|---|
| THH2400AR | 6 | 4.8 | 4 |
| THH3200AR | 8 | 6.4 | 5.3 |
The installation of HEATSTRIP® Classic is simple and easy with the standard mounting brackets supplied. For other locations, there are a range of mounting options available – (refer to diagrams). The HEATSTRIP® Classic can be mounted directly to the ceiling; angled downwards on a wall; fitted flush with the ceiling; suspended on chains or poles; attached to beams/poles/umbrella’s; mounted end-to-end, or 2 units together.
- Minimum mounting height (including flush mount) 2.1m
- Ideal mounting height (including flush mount) 2.2m – 2.5m
- Maximum mounting height (including flush mount) 2.7m
The mounting height of the electric heater can have a significant impact on performance. For mounting heights higher than the ideal range, we recommend the use of wires/chains or optional extension poles to reduce the height and ensure the heater is within the ideal range. Heater performance may be affected if outside this range.
*Chain/wire not included
| MODEL | POWER (Watts) | CURRENT (Amps) | DIMENSIONS (mm) | WEIGHT (kg) | LEAD LENGTH (mm) | PLUG | HEATING AREA (m2) |
|---|---|---|---|---|---|---|---|
| THH2400AR | 2400 | 10 | 1371 x 165 x 48 | 7 | 1000 | YES | 4-5 |
| THH3200AR | 3200 | 13.5 | 1780 x 165 x 48 | 9 | 1000 | NO | 5-6 |
Materials of Construction: High temperature ceramic coated extruded alloy. IP55 Rated.
